intergalaktik uses #lowcode EEZ Studio for data acquisition from the #TinySA portable spectrum analyzer. #OpenSource #OpenScience #Automation

New #ULX3S batch arrived in intergalaktik all papers send to Mouser Electronics and once boards arrive to Mouser/CS they will be available for order in EU and UK. This batch had 100% success rate and it was done by D&M(Drives and Motors) from Croatia drives-motors.hr/about-us/

Finally #ULX3S v3.1.8 12F on envox stock envox.eu/product/ulx3s-… Image is for reference only - check the store as 85F is also on #discount

Packing new batch of #ULX3S boards produced in #Croatia for Mouser Electronics Soon all versions will be restocked hr.mouser.com/c/?q=ulx3s currently only 85F is available! #opensource #openhardware #FPGA #PCBA

Wonderful progress on the #opensource #openhardware BB3-CM4 project. A few pictures, courtesy of intergalaktik ... #openscience #maker #raspberrypi

Hallo from BB3-CM4! In colaboration with envox && Radiona_org - Zagreb Makerspace with NLnet Foundation @[email protected] help we have working prototype of Raspberry Pi #CM4 compatible #BenchBox3 that can also hold #ULX4M FPGA board or other compatible board. #STM32 board is also in progress!

BB3 powered by intergalaktik intergalaktik.eu/news/bb3-cm4-p… #opensource #openhardware #openscience #maker

New #blogpost about BB3-CM4 progress is out intergalaktik.eu/news/bb3-cm4-p…

Thank you logic destroyer on detailed explan of your core and making it running on #ulx3s - sounds on

Thanks to NLnet Foundation @[email protected] new intergalaktik post is out #EMI #EMC intergalaktik.eu/news/bb3-cm4-e…

Hello everyone, for the ULX3S-12F, there is a coupon code for 10 FPGA boards: KIANRISCV. Grab it while you can! #ulx3s Radiona_org - Zagreb Makerspace Goran_Mahovlic lectronz.com/products/ulx3s…

The Synthomir is Radiona_org - Zagreb Makerspace's newly OSHWA (Open Source Hardware Association)-certified 8-bit synthesizer that runs on an ATmega328P: certification.oshwa.org/hr000115.html

📢 the new version of #OpenSource #LowCode EEZ Studio (v0.11.0) comes now with LVGL v9 support, so now you can choose whether your newly created project will use v8.3 or v9.0 github.com/eez-open/studi… #OpenScience #Maker #TFT #LVGL #Embedded #Automation #HMI

New on Lectronz: Synthomir lectronz.com/products/synth… by intergalaktik #Arduino #Synth #Kits

Thanks to NLnet Foundation @[email protected] grant we have STMicroelectronics #STM32 H7 CM4 compatible board for envox #BenchBox3 more details here: intergalaktik.eu/news/bb3-cm4-e…

In a search for a blocking and non reflective material #EMC

v02 - I am re-using 2.5mm wood material that is arriving with JLCPCB stencil - in this version I just use zip ties to hold both probes at place...

Still not perfect, but check this #magic #emc box prototype with #magnetic closing system :) Will write next blog post soon! NLnet Foundation @[email protected]

#DIY #EMC #BOX article is out! intergalaktik.eu/news/diy-emc-c…

#EMARD designs for the #EMC chamber are ready. All done in OpenSCAD